How to Upload Dreamweaver Site to Bluehost

Set up FTP, SFTP, WebDav, or RDS connections to upload or download files from the publishing web server.

A remote server (ofttimes referred to equally a spider web server or a publishing server) is where you publish your site files so that people tin view them online. This remote server is simply another computer like your local estimator with a collection of files and folders on information technology, such every bit an FTP server.

Specify a folder for your site on the remote server, just as yous specified a folder for your local site on your local computer. Dreamweaver refers to the specified remote binder as your remote site.

When you lot set up a remote folder, you as well select a connection method for Dreamweaver to upload and download files to and from your spider web server. The well-nigh typical connection method is FTP, only Dreamweaver likewise supports local/network, FTPS, SFTP, WebDav, and RDS connection methods. If y'all don't know which connection method to utilize, enquire your ISP or your server administrator.

Note:

Dreamweaver besides supports connections to IPv6-enabled servers. Supported connexion types include FTP, SFTP, WebDav, and RDS. For more information, see www.ipv6.org/.

Before you offset, you must have access to a remote web server—such as a hosting company's server, a server owned past the customer you're working for, or an intranet server within your company.

If you do not accept access to a server, contact your Internet service provider, your customer, your organisation administrator, or ane of the many hosting companies that provide web hosting packages.

You also must take divers a local site before y'all proceed. For more than information on defining a local site, come across Set up up a local version of your site.

You can connect to a remote (or a publishing server) using different connectedness methods depending on your set up.

The near common used connection method is FTP. Withal, yous tin can also use more than secure connection methods such as Secure FTP (SFTP) or FTP over SSL (FTPS).

If you lot are using a folder within your network every bit the remote server, and then you can opt for local or network connections.

Other connexion methods supported are Remote Development Services (RDS), and Web-based Distributed Authoring and Versioning (WebDAV) protocol.

If you lot are non certain well-nigh the connection method to cull, ask your ISP or server administrator.

Use the filters below to navigate to view merely the connexion method you want to use, or just read on.

Utilize this setting if you connect to your web server using FTP.

Note: Business concern Goad supports only SFTP. If you lot are using Business Catalyst, come across the department on SFTP connections on this page.

Select Site > Manage Sites.

Click New to fix a new site, or select an existing Dreamweaver site and click the edit icon.

In the Site Setup dialog box, select the Servers category and do one of the following:

• Click the Add together New Server button to add a new server.
• Select an existing server and click the Edit Existing Server push.

Here is a sample Server set upwards screen showing the bones setup options with the text fields populated.



Setting upwards FTP connections

In the Server Name text box, specify a name for the new server. You can choose any name that you require.

Select FTP from the Connect Using pop-up menu.

In the FTP Accost text box, enter the accost of the FTP server to which you upload files for your website.

Your FTP address is the total Cyberspace proper noun of a reckoner system, such every bit ftp.mindspring.com. Enter the total address without whatsoever additional text. In particular, don't add together a protocol name in front of the accost.

If you lot do not know your FTP address, contact your web hosting company.

Note:

Port 21 is the default port for receiving FTP connections. You lot tin change the default port number by editing the text box to the right. The result when you save your settings is a colon and the new port number appended to your FTP address (for instance, ftp.mindspring.com:29).

In the Username and Password text boxes, enter the username and password that you use to connect to the FTP server.

Note:

You must obtain the FTP address, username and password information from the system administrator for the company hosting your site. No ane else has access to this information. Enter the data exactly equally your system ambassador gives information technology to you.

Click Test to exam your FTP address, username, and countersign.

Dreamweaver saves your password by default. Deselect the Save option if you prefer that Dreamweaver prompt you lot for a password each fourth dimension yous connect to the remote server.

In the Root Directory text box, enter the directory (folder) on the remote server where yous shop documents that are visible to the public.

If y'all are uncertain well-nigh what to enter as the root directory, contact the server'southward ambassador or exit the text box blank. On some servers, your root directory is the same every bit the directory y'all first connect to with FTP. To notice out, connect to the server. If a folder with a name like public_html, or world wide web, or your user name, appears in the Remote File view in your Files console, that'due south probably the directory you should enter in the Root Directory text box.

In the Web URL text box enter the URL of your website (for example, http://world wide web.mysite.com). Dreamweaver uses the Web URL to create site root-relative links, and to verify links when you lot use the link checker.

For a more extensive explanation of this selection, see Advanced Settings category.

Expand the More Options section if you still need to set more options.

Select Apply Passive FTP if your firewall configuration requires utilize of passive FTP.

Passive FTP enables your local software to gear up the FTP connexion rather than requesting the remote server to set information technology upward. If you are not sure whether you use passive FTP, check with your organisation ambassador.

For more information on passive FTP, come across What is Passive FTP?

Select Utilize IPv6 Transfer Mode if y'all are using an IPv6-enabled FTP server.

With the deployment of version six of the Net Protocol (IPv6), EPRT and EPSV have replaced the FTP commands PORT and PASV, respectively. Thus, if you are trying to connect to an IPv6-enabled FTP server, you must use the extended passive (EPSV) and the extended active (EPRT) commands for your data connection.

For more information, run into www.ipv6.org/.

Select Use Proxy if you want to specify a proxy host or proxy port.

For more data, click the link to become to the Preferences dialog box, then click the Assist push in the Site category of the Preferences dialog.

Click Save to close the Basic screen. And so in the Servers category, specify whether the server you simply added or edited is a remote server, a testing server, or both.

For Help with troubleshooting FTP connectivity problems, see Troubleshoot FTP bug in Dreamweaver.

Use Secure FTP (SFTP) if your server/firewall configuration requires the use of secure FTP. SFTP uses encryption and identity keys to secure a connection to your remote/testing server.

Note:

Your server must exist running an SFTP service for yous to select this choice. If y'all don't know whether your server is running SFTP, check with your server ambassador.

You tin can at present authenticate connections to an SFTP server based on an 'Identity Fundamental' (with or without a passphrase).

Dreamweaver supports merely OpenSSH key files.

Select Site > Manage Sites.

Click New to gear up a new site, or select an existing Dreamweaver site and click Edit.

In the Site Setup dialog box, select the Servers category and do one of the following:

• Click the Add together New Server button to add together a new server.
• Select an existing server and click the Edit Existing Server button.

In the Server Name text box, specify a name for the new server. The proper noun can be anything of your choosing.

Select SFTP from the Connect Using pop-up menu.

Specify the other options in the dialog box based on one of the applicable scenarios below:

• Scenario one: No cardinal, but have user name and password
• Scenario 2: Have a key that does non require a passphrase
• Scenario 3: Take a key that requires a passphrase
  

You do non have a key and want to establish an SFTP connection using only the credentials - combination of user name and password. In this case, use the "Username and Countersign" authentication method.

Site setup with SFTP connection - user name and password

In the Server Proper name text box, specify a proper name for the new server. This name is used internally by Dreamweaver to identify the server, so you can choose any name you like.

From the Connect list, click SFTP, and enter a valid SFTP accost and port.


For the authentication method, click Username and Password, and then provide the user name and password.


To verify the connexion, click Examination.

Enter a valid Root Directory.

You have a key that does non crave a passphrase. And, you desire to establish an SFTP connectedness using the combination of user proper name and Identity File. In this case, use the "Private Key File" authentication method.

In the Server Name text box, specify a name for the new server.

This name is used internally by Dreamweaver to identify the server, so you tin can choose whatsoever name you like.

From the Connect list, click SFTP, and enter a valid SFTP address and port.


For the hallmark method, click Private Central File, and then provide the post-obit:

• User name
• A valid Identity File
• Leave the Passphrase blank and select Save Passphrase
  



Site setup with SFTP connexion - Identity File

Note:

Dreamweaver supports but OpenSSH key files.

To verify the connection, click Examination.

Enter a valid Root Directory.

You lot have a primal that requires a passphrase. And, you want to establish an SFTP connectedness using the combination of user name, Identity File, and the Passphrase for the key. In this case, use the "Private Key File" authentication method.

In the Server Name text box, specify a name for the new server. This proper noun is used internally past Dreamweaver to identify the server, so you can choose whatever proper noun you like.

From the Connect listing, click SFTP, and enter a valid SFTP accost and port.


For the authentication method, click Private Key File, and then provide the following:

• User proper name
• A valid Identity File
• Passphrase for the Identity File
  



Site setup with SFTP connection - Identity File

Note:

Dreamweaver supports only OpenSSH fundamental files.

To verify the connection, click Test.

Enter a valid Root Directory.

Note:

Port 22 is the default port for receiving SFTP connections.

Prepare the residuum of the options the aforementioned way equally you lot would for FTP connections. For more information, run across FTP connections.

FTPS (FTP over SSL) provides both encryption and authentication support as compared to SFTP that offers only encryption support.

When using FTPS for data transfer, yous tin can choose to encrypt your credentials, and likewise the data beingness transmitted to the server. In addition, yous can choose to authenticate the server's credentials and connections. The credentials of a server are validated against the electric current set up of trusted CA server certificates in the Dreamweaver database. Certificate Authorities (CAs), which include companies like VeriSign, Thawte, and and so on, issue digitally signed server certificates.

Note:

This procedure describes options specific to FTPS. For information on regular FTP options, see FTP connections.

Select Site > Manage Sites.

Click New to ready a new site, or select an existing Dreamweaver site and click Edit.

In the Site Setup dialog box, select the Servers category and do one of the following:

• Click the "+" (Add New Server) push button to add a new server.

• Select an existing server and click the Edit Existing Server button.

In Server Proper noun, specify a name for the new server.

In Connect Using, select one of the post-obit based on your requirement.

FTP over SSL/TLS (Implicit Encryption)

The server terminates the connection if the security asking is not received.

FTP over SSL/TLS (Explicit Encryption)

If the customer does not request for a secure connection, the server can proceed with an insecure transaction, or refuse/limit the connection.

In Hallmark, choose one of the post-obit options:

None

The server's credentials, signed or self-signed, are displayed. If yous accept the server's credentials, the document is added to a certificate shop, trustedSites.db, in Dreamweaver. When you lot connect to the same server the next time, Dreamweaver directly connects to the server.

Annotation:

If the credentials of a self-signed certificate have inverse on the server, yous are prompted to take the new credentials.

Trusted

The presented certificate is validated with the current set of trusted CA server certificates in the Dreamweaver database. The list of trusted servers is stored in the cacerts.pem file.

Note:

An fault message is displayed if yous select Trusted Server, and connect to a server with a self-signed certificate.

Expand the More Options section to set more options.

Apply Passive FTP

if your firewall configuration requires use of passive FTP. Passive FTP enables your local software to set up the FTP connection rather than requesting the remote server to gear up it upward. If y'all are not sure whether y'all utilise passive FTP, check with your system administrator.

For more information on passive FTP, see What is Passive FTP?

Encrypt Only Control Channel

Select this choice if you want to encrypt only the commands that are existence transmitted. Use this option when the data beingness transmitted is already encrypted, or does not contain sensitive information.

Encrypt Only User Proper noun and Password

Select this option if you desire to encrypt only your user proper noun and countersign.

Utilize IPv6 Transfer Style

Gear up this option if you are using an IPv6-enabled FTP server.

With the deployment of version 6 of the Internet Protocol (IPv6), EPRT and EPSV have replaced the FTP commands PORT and PASV, respectively. Thus, if you lot are trying to connect to an IPv6-enabled FTP server, you lot must apply the extended passive (EPSV) and the extended active (EPRT) commands for your information connection. For more data, see www.ipv6.org/.

Click Salvage to close the Basic screen. And so in the Servers category, specify whether the server you added or edited is a remote server, a testing server, or both.

For Help with troubleshooting FTP connectivity issues, run into Troubleshoot FTP issues in Dreamweaver.

Use this setting to connect to a network binder, or if you are storing files or running your testing server on your local computer.

Select Site > Manage Sites.

Click New to set up a new site, or select an existing Dreamweaver site and click Edit.

In the Site Setup dialog box, select the Servers category and practice 1 of the following:

• Click the Add together New Server push to add together a new server.
• Select an existing server and click the Edit Existing Server button.

In the Server Proper noun text box, specify a name for the new server. This name is used internally by Dreamweaver to identify the server, so y'all can choose any name you similar.

Select Local/Network from the Connect Using popular-upwardly carte du jour.

Click the folder icon beside the Server Folder text box to browse to and select the folder where you store your site files.

In the Web URL text box enter the URL of your website (for case, http://www.mysite.com). Dreamweaver uses the Web URL to create site root-relative links, and to verify links when you utilise the link checker.

For a more than extensive explanation of this option, run into Advanced Settings category.

Click Save to close the Basic screen. Then in the Servers category, specify whether the server you just added or edited is a remote server, a testing server, or both.

In the Servers category in the Site Setup dialog box, specify whether the server you added or edited is a remote server, a testing server, or both.

Utilize this setting if you connect to your web server using the Spider web-based Distributed Authoring and Versioning (WebDAV) protocol.

For this connectedness method, you must have a server that supports this protocol, such equally Microsoft Internet Data Server (IIS) 5.0 or an appropriately configured installation of Apache web server.

Note:

If you select WebDAV as your connexion method, and you are using Dreamweaver in a multiuser environment, you should too make sure that all of your users select WebDAV as the connection method. If some users select WebDAV, and other users select other connectedness methods (FTP, for example), Dreamweaver's check-in/check-out feature will not piece of work as expected, since WebDAV uses its own locking organisation.

Select Site > Manage Sites.

Click New to ready a new site, or select an existing Dreamweaver site and click Edit.

In the Site Setup dialog box, select the Servers category and practice one of the following:

• Click the Add New Server button to add together a new server

• Select an existing server and click the Edit Existing Server button

In the Server Name text box, specify a name for the new server. The name can be anything of your choosing.

Select WebDAV from the Connect Using popular-up menu.

For the URL, enter the complete URL to the directory on the WebDAV server you want to connect to.

This URL includes the protocol, port, and directory (if not the root directory). For example, http://webdav.mydomain.internet/mysite.

Enter your username and countersign.

This information is for server authentication and is not related to Dreamweaver. If you are not sure of your username and countersign, bank check with your system administrator or webmaster.

Click Test to test your connectedness settings.

Select the Save choice if you want Dreamweaver to remember your countersign each time you start a new session.

In the Web URL text box enter the URL of your website (for example, http://world wide web.mysite.com). Dreamweaver uses the Web URL to create site root-relative links, and to verify links when you use the link checker.

For a more extensive explanation of this pick, meet Advanced Settings category.

Click Salvage to close the Basic screen. Then in the Servers category, specify whether the server you only added or edited is a remote server, a testing server, or both.

In the Servers category in the Site Setup dialog box, specify whether the server yous added or edited is a remote server, a testing server, or both.

Use this setting if you connect to your spider web server using Remote Development Services (RDS). For this connection method, your remote server must be on a reckoner running Adobe® ColdFusion®

Select Site > Manage Sites.

Click New to gear up upwards a new site, or select an existing Dreamweaver site and click Edit.

In the Site Setup dialog box, select the Servers category and do i of the post-obit:

• Click the Add New Server button to add a new server

• Select an existing server and click the Edit Existing Server push

In the Server Name text box, specify a name for the new server. This proper name is used internally by Dreamweaver to identify the server, so you can choose any name y'all like.

Select RDS from the Connect Using pop-upwardly menu.

Click the Settings button and provide the following information in the Configure RDS Server dialog box:

• Enter the name of the host calculator where your web server is installed.
• The host proper noun is probably an IP address or a URL. If you are unsure, ask your ambassador.
• Enter the port number that you connect to.
• Enter your root remote folder as the host directory. For example, c:\inetpub\wwwroot\myHostDir\.
• Enter your RDS username and password.

Annotation:

These options might not appear if you lot set your username and password in the ColdFusion Ambassador security settings.

• Click Relieve if you want Dreamweaver to remember your settings.

Click OK to close the Configure RDS Server dialog box.

In the Web URL text box enter the URL of your website (for example, http://world wide web.mysite.com). Dreamweaver uses the Web URL to create site root-relative links, and to verify links when you use the link checker.

For a more all-encompassing caption of this pick, run into Advanced Settings category.

Click Relieve to close the Bones screen. And so in the Servers category, specify whether the server y'all just added or edited is a remote server, a testing server, or both.

Select Site > Manage Sites.

Click New to set upward a new site, or select an existing Dreamweaver site and click Edit.

In the Site Setup dialog box, select the Servers category and do one of the following:

• Click the Add New Server push to add together a new server

• Select an existing server and click the Edit Existing Server button

Specify Basic options as necessary, and and so click the Avant-garde button.

Select Maintain Synchronization Information if you desire to automatically synchronize your local and remote files. (This option is selected by default.)

Select Automatically Upload Files to Server on Save if you want Dreamweaver to upload your file to your remote site when you salve the file.

Select Enable File Check Out if you want to activate the Bank check In/Out system.



Setting advanced server connect options

If y'all are using a Testing server, select a server model from the Server Model pop-up bill of fare. For more information, see Set up a testing server.

Depending on the type of connection, you can connect to or disconnect from your remote folder:

FTP, SFTP, FTPS, WebDAV, or RDS connectedness:

In the Files panel:

• To connect, click Connects to Remote Host in the toolbar.
• To disconnect, click Disconnect in the toolbar.

Local or network connection:

You do not have to explicitly connect to the remote folder; you are always connected to it. Click the Refresh button to see your remote files.

• To connect, click Connects to Remote Host in the toolbar.
• To disconnect, click Disconnect in the toolbar.

Here are some common bug you may encounter in setting upwardly a remote folder, and how to resolve them.

• The Dreamweaver FTP implementation might not work properly with certain proxy servers, multilevel firewalls, and other forms of indirect server admission. If you encounter bug with FTP access, ask your local organization administrator for help.
• For a Dreamweaver FTP implementation, y'all must connect to the remote system's root folder. Be sure to indicate the remote system'south root binder as the host directory. If you've specified the host directory using a unmarried slash (/), you might demand to specify a relative path from the directory yous are connecting to and the remote root folder. For instance, if the remote root folder is a higher level directory, you may need to specify a ../../ for the host directory.
• Use underscores in identify of spaces, and avoid special characters in file and folder names wherever possible. Colons, slashes, periods, and apostrophes in file or folder names can sometimes cause problems.
• If you encounter problems with long filenames, rename them with shorter names. On the Mac OS, filenames cannot be more 31 characters long.
• Many servers use symbolic links (UNIX), shortcuts (Windows), or aliases (Macintosh) to connect a binder on i part of the server's disk with another binder elsewhere. Such aliases usually accept no effect on your power to connect to the appropriate folder or directory; yet, if you can connect to i office of the server but not another, there might exist an alias discrepancy.
• If you lot come across an error message such as "cannot put file," your remote binder may be out of infinite. For more detailed data, wait at the FTP log.

Note:

In general, when you see a problem with an FTP transfer, examine the FTP log past selecting Window > Results (Windows) or Site > FTP Log (Macintosh), then clicking the FTP Log tag.

For more information on troubleshooting FTP bug, run across Troubleshoot FTP issues in Dreamweaver.

beltranvanctiod.blogspot.com

Source: https://helpx.adobe.com/dreamweaver/using/connect-remote-server.html

Share this post